Copying open and locked files with SyncBackSE/Pro

Open / locked files can only be copied by SyncBackSE/Pro when the following criteria are met:

• SyncBackFree does not support copying of open/locked files. It is only available in SyncBackSE and SyncBackPro.

• SyncBackSE/Pro is being used on Windows XP, Windows 2003, Windows 2008, Windows 2012, Windows Vista, Windows 7, Windows 8 or newer. Open/locked files can be copied when using 32-bit or 64-bit versions of Windows.

• The open / locked file is on a local volume on an internal drive that is formatted with NTFS or ReFS, or it is on a local volume on an internal drive that is formatted with FAT32 and you also have a local volume on an internal drive that is formatted with NTFS or ReFS. You can copy locked files to any other drive (external or internal), network drive, Zip file, FTP, etc. The restriction (which is a restriction in Windows itself) is on where the locked file is, not where it is copied to. If the file is on a remote Windows drive then using SyncBack Touch may be the solution (see below).

• You are running SyncBackSE/Pro with a user who is an Administrator (on Vista or newer, on XP and 2003 the user must be a member of the Backup Operators group). If Vista or newer is being used then SyncBackSE/Pro must be run with elevated privileges (which is the default, but may not be the case if you've modified or deleted the manifest file) as an Administrator. Using SyncBack Touch you can copy open/locked files without this requirement (see below).

“Local“ means a volume on a drive that is physically connected to the computer, i.e. open / locked files cannot be copied from drives over the network.

“Internal“ means a drive that is connected via IDE, SCSI, or SATA. Drives connected via USB, Firewire, eSATA, etc. are considered external. Basically, if the drive is inside your computer’s case, then it is considered internal.

Check the Non-critical Errors in the log file to see if you've received any errors related to open file copying. For more information on those errors please read this article.

Possible reasons why an open / locked file cannot be copied:

• The Volume Shadow Copy Service (VSS) is not installed or working correctly. VSS is a part of Windows and not SyncBackSE/Pro. It is used to copy open / locked files. If there is a problem with VSS then the log file will contain the error messages in the log file (see the Non-critical Errors section) or other error message related to open files. See this article for details.

• Only one profile can copy open / locked files from a particular volume at any one time. If two profiles are running at the same time then only one of them will be able to copy the open / locked files from that volume. If you are running profiles in a group then deselect the option to run them in parallel.

• Desktop search programs like Copernicus Desktop Search (CDS), Google Desktop Search (GDS), and MSN Search Toolbar can interfere with the copying of open / locked files. You may need to close those programs to guarantee that open / locked files can be copied.

• The open file is on a “virtual” volume, e.g. you are using a 3rd party program like DriveCrypt. Open files cannot be copied from those drives. This can also be the case where the profile 'points to' (is configured to include) virtual paths (e.g., symbolic links provided by Windows for use by legacy programs) to the real path\location of the file. VSS can not be used to copy open/locked files via virtual paths, but can generally copy the file via the real storage path.

• Whether open/locked files can be copied from a virtual drive-letter created with the SUBST command (providing the underlying physical drive which the SUBST command points to fulfils the other usual criteria) may depend on your version of Windows. It appears this is not possible in XP or Server 2003, but may be possible in Vista and later versions.

• Some software (e.g. Acronis True Image 9) can also cause VSS to stop working. There have also been reports of Symantec Antivirus Corporate Edition and Microsoft Visio causing problems with VSS.

• In some cases when a profile has just been imported, or SyncBackSE/Pro has just been installed and run from the installation program, it may fail to copy open / locked files. Reboot and try again.

• Make sure you've installed all the latest Windows updates & patches. Microsoft regularly releases hot-fixes and updates.

• The file(s) or partition may be corrupted. Run chkdsk/scandisk to check for errors.

• Make sure you are using the latest version of SyncBackSE/Pro.

• If the log file contains the error Timed-out waiting for access to VSS DLL then see this page for details.

SyncBack Touch

SyncBack Touch is a cross-platform file server. It lets SyncBackPro and SyncBackSE copy files to and from another device, e.g. Windows, OS X or Android device. SyncBackFree cannot use SyncBack Touch.

Simply install SyncBack Touch on the device you want to the access the files on and then create a profile in SyncBackPro/SE to use that device. 

On Windows, SyncBack Touch runs as a Windows service in the background. It can copy open/locked files and also has access to all the files the Windows internal system account can access. This means the user running SyncBackPro/SE doesn't need to be an Administrator to copy open/locked files, nor do they need to be one to access all the files.

Frequently Asked Questions

  1. Support Policy
  2. Terms and Conditions
  3. Receiving e-Mail Responses From 2BrightSparks
  4. Viewing our website in another language
  5. The Latest Version Numbers & Updates
  6. 2BrightSparks Freeware
  7. Difference between Backup and Sync
  8. My serial number does not work
  9. Uninstalling and Removing SyncBackFree-SE-Pro
  10. SyncBackFree-SE-Pro are different programs
  11. How to Backup Profiles
  12. Problems downloading software
  13. Problems Downloading Files
  14. Technical Support by Email
  15. Renaming a profile
  16. Copying open and locked files with SyncBackSE/Pro
  17. How to capture a screenshot of your computer
  18. Software reported as security risk
  19. Linux, UNIX, or Mac Operating System Support
  20. Running SyncBackSE and SyncBackPro on a Mac
  21. Cookies and JavaScript at 2BrightSparks
  22. Receiving the 2BrightSparks Forum RSS Feed
  23. Disk Imaging Software
  24. Download the latest version of the software
  25. SyncBackFree-SE-Pro System Requirements
  26. How To Back Up Thunderbird Emails
  27. Running profiles periodically in the background
  28. SyncBackFree-SE-Pro simultaneous installations
  29. Forcing SyncBack to display in English
  30. The Differences window appears as top window
  31. No answer to my email
  32. Explaining Royalty Free publishing
  33. Difference between InfoHesiveEP Outliner - Editor
  34. Non-Reversable Deletion with DeleteOnClick
  35. Evaluating OnClick Utilities
  36. Validating Serial Numbers
  37. Searching the 2BrightSparks Site
  38. How to install SyncBack-SE-Pro
  39. Explain the trial versions
  40. Redistributing Software
  41. Sending 2BrightSparks Attachments
  42. How to deal with Spam emails
  43. My anti-virus software says your software contains a virus
  44. InfoHesiveEP helps reach a wider readership
  45. SyncBack Touch and the SyncBack Management Service (SBMS)
  46. Problems Copying Text from a PDF
  47. Example uses for SyncBack Touch

Feedback and Knowledge Base